本廠新研發的平板壓花機：適合于：各種面料的壓花。而且還適合皮革上的壓花。 此款機器為多功能式：皮革面料壓花兩用機型

無接縫全自動面料凹凸平板壓花機

參 數：有效面料幅寬：1.6m
基本功率：60kw、分4區加熱，
加熱時間：10—30分鐘
{zg}溫度：300度
20小時產量：2000----4000m
安裝尺寸：長3.1mx1.4mx1.8m
{zd0}壓力：5000MPa
機器重量：3噸左右
產 量：2m/min
加熱方式：可控硅加熱更節能
平均能耗：15——23度/h

Theory of Seamless automatic concavo-convex plate embossing machinery
The flow of HF electric current was controlled into circular or any other shape's heating coil. (Usually made by stainless steel tube)
A coil which produces changes in the magnetic polarity of the instantaneous beam, then the magnetic flux through the mold surface through to the fabric, the fabric and
heating current in the opposite direction, there will be corresponding large eddy currents. Because the fabric memory in the resistance, it will produce a lot of Joule heat, so that the fabric itself rapidly rising temperature, so as to achieve the fabric imprint. The aircraft is in the old-fashioned base plate embossing machines, according to the needs of the market, developed by our technical staff from production.
The machine features:  fast time of pressure , good shape, automatic docking seamless, automatic discharge, automatic discharge design, you can root
According to the customer's need to customize different pattern to meet the needs of customers and market's demand.
 Parameter:breadth:1.6m               
 Prime power:60kw,heat up in 6 separate section
 heat-up time:10-30minutes  
 the highest temperature:300 centi degree
output In 20 hours:2000-4000m
measurement of installation:3.1mx1.4mx1.8m   
 maximum pressure:5000MPa
 weight of machine: around 2.5t     
output:2m/min
heat up: energy-saving       
average consumption:15-23degree/h