WS6L10VC型進口高壓止回閥high-pressure check valve

品牌：德國沃德WODE

概述Summar
高壓止回閥主要用于高壓加壓的天然氣加氣系統，防止加壓天然氣倒流的閥門。焊接式高壓單向閥是靠管路中介質本身的流動產生的力而自動開啟和關閉的，屬于一種自動閥門。焊接式高壓單向閥只允許介質向一個方向流動，而且阻止方向流動。
High-pressure check valve is mainly used for pressurized gas filling system, pressurized gas to prevent backflow valve. Welding type high pressure check valve is generated by the pipeline flow of the medium itself force automatically turned on and off, is an automatic valve. Welding type high pressure check valve is only allowing media to flow in one direction, and stop the flow direction.
參數Parameters
公稱壓力： PN16、PN32、PN40、PN50Mpa
Nominal pressure: PN16, PN32, PN40, PN50Mpa
公稱通徑：DN3～DN50
Nominal diameter: DN3 ~ DN50
連接方式可選焊接、或者內螺紋、卡套
Connection: welding, internal thread、Card sets
焊接管外徑Welded pipe diameter
∮10，∮12，∮14，∮16，∮18，∮20，∮22，∮25，∮28，∮30，∮32，∮40，∮42，∮50，∮57
適用介質：加壓天然氣CNG﹑水﹑氣等
Suitable medium: CNG, water, gas etc.
適用溫度：-20℃～+120℃-70℃～180℃等
Applicable temperature:-20℃～+120℃-70℃～180℃
制造材料：20#﹑1Cr18Ni9Ti﹑304﹑316﹑316L﹑12Cr1Mov等

Material: 20#, 1Cr18Ni9Ti, 304, 316,316L, 12Cr1Mov etc.

注：以上尺寸僅供參考，如需更詳細的圖紙尺寸及資料說明請聯系沃德中國代理商。我公司聯系電話010-51298906；竭誠歡迎您來電咨詢訂購。